1. UNBLOCK
If the seawater circuit is not properly maintained, the amount of heat transferred will be reduced and this can create the same condition as purchasing a system that is too small to cool the space. To avoid this, the seawater strainer should be checked for debris that may have been brought in by the raw water and removed. On average, the A/C unit should be checked monthly during the summer months, but this will vary depending on the quality of water that a boat sails or cruises in.
2. CLEAN
Inspect and clean your return air filter which is located on the blower/evaporator assembly. There may also be an air filter built into the return air grill assembly. This will need cleaning as well. Lastly, use fresh water to test that a full condensate pan on the blower/evaporator assembly will drain away within 30 seconds.
3. SECURE
All of the systems fixings and electrical connections should be checked and tightened if needed to make sure they are secure. It is also important to check the hoses, coils and other piping for leaks and repair if necessary.
- © Fairfax NZ News Air conditioning tips for your boat
No boat owner wants to find themselves mid-cruise in 40 degree heat without a functioning air conditioning system so here's a three-point checklist to ensure smooth running of air conditioning systems.
1. UNBLOCK
If the seawater circuit is not properly maintained, the amount of heat transferred will be reduced and this can create the same condition as purchasing a system that is too small to cool the space. To avoid this, the seawater strainer should be checked for debris that may have been brought in by the raw water and removed. On average, the A/C unit should be checked monthly during the summer months, but this will vary depending on the quality of water that a boat sails or cruises in.
2. CLEAN
Inspect and clean your return air filter which is located on the blower/evaporator assembly. There may also be an air filter built into the return air grill assembly. This will need cleaning as well. Lastly, use fresh water to test that a full condensate pan on the blower/evaporator assembly will drain away within 30 seconds.
3. SECURE
All of the systems fixings and electrical connections should be checked and tightened if needed to make sure they are secure. It is also important to check the hoses, coils and other piping for leaks and repair if necessary.
- © Fairfax NZ News
1. UNBLOCK
If the seawater circuit is not properly maintained, the amount of heat transferred will be reduced and this can create the same condition as purchasing a system that is too small to cool the space. To avoid this, the seawater strainer should be checked for debris that may have been brought in by the raw water and removed. On average, the A/C unit should be checked monthly during the summer months, but this will vary depending on the quality of water that a boat sails or cruises in.
2. CLEAN
Inspect and clean your return air filter which is located on the blower/evaporator assembly. There may also be an air filter built into the return air grill assembly. This will need cleaning as well. Lastly, use fresh water to test that a full condensate pan on the blower/evaporator assembly will drain away within 30 seconds.
3. SECURE
All of the systems fixings and electrical connections should be checked and tightened if needed to make sure they are secure. It is also important to check the hoses, coils and other piping for leaks and repair if necessary.
- © Fairfax NZ News